Tataiso e sebetsang bakeng sa Lipontšo tsa LED tsa Ka hare bakeng sa Likhoebo le Liketsahalo

Lipontšo tsa LED tsa kahare ke khetho e tsebahalang bakeng sa papatso le boithabiso. Leha ho le joalo, batho ba bangata ha ba tsebe hantle hore na ba ka khetha skrine ea boleng bo holimo joang ka theko e tlaase.
Tataisong ena, re tla u tsamaisa ka lintlha tsa bohlokoa pele u tsetela ponts'ong ea LED ea kahare, ho kenyeletsoa tlhaloso ea eona ea mantlha, mekhoa ea ntlafatso le litheko.

1. Pontšo ea LED ea ka Hare ke Eng?

Joalo ka ha lebitso le bolela, aponts'o ea ka hare ea LEDe bua ka li-skrini tsa LED tse mahareng ho isa ho tse kholo tse etselitsoeng tšebeliso ea ka tlung.Lipontšo tsena hangata li bonoa mabenkeleng a maholo, mabenkeleng a mabenkele, libanka, liofising le tse ling.

Ho fapana le lits'oants'o tse ling tsa dijithale, joalo ka li-skrini tsa LCD, lipontšo tsa LED ha li hloke ho khantša morao, ho ntlafatsang ho khanya, ho sebetsa hantle ha matla, li-angles tsa ho shebella le phapang.

Phapang lipakeng tsa Lipontšo tsa LED tse ka Hare le Ka Ntle

Mona ke phapang e kholo lipakeng tsa lipontšo tsa LED tsa kahare le kantle:

1. Khanya
   Hangata li-skrini tsa ka tlung li hloka khanya e tlase ka lebaka la khanya e laoloang ea tikoloho.
   Ka tloaelo, lipontšo tsa ka tlung li na le khanya ea li-nits tse ka bang 800, athe li-skrini tsa kantle li hloka bonyane li-nits tse 5500 ho hlahisa litaba ka mokhoa o hlakileng.

2. Pixel Pitch
   Pixel pitch e amana haufi-ufi le sebaka sa ho shebella.
   Lits'oants'o tsa LED tsa kahare li shebiloe hole haufi, ho hloka qeto e phahameng ea pixel ho qoba ho sotha litšoantšo.
   Lits'oants'o tsa LED tsa kantle, joalo ka lipontšo tsa P10, li atile haholo. Hangata liboto tse kholo tsa kantle li hloka liqeto tse phahameng.

3. Boemo ba Tšireletso
   Lits'oants'o tsa LED tsa kahare hangata li hloka tekanyetso ea IP43, athe lipontšo tsa kantle li hloka bonyane IP65 ka lebaka la maemo a leholimo a fapaneng. Sena se etsa bonnete ba hore metsi le lerōle li hanana le pula, mocheso o phahameng, khanya ea letsatsi le lerōle.

4. Litšenyehelo
   Theko ea lipontšo tsa LED e ipapisitse le thepa, boholo le qeto.
   Qeto e phahameng e bolela li-module tse ngata tsa LED ka phanele, tse eketsang litšenyehelo. Ka mokhoa o ts'oanang, li-skrini tse kholo li theko e boima haholo.

2. Theko ea Pontšo ea LED ea kahare

2.1 Lintlha Tse Hlano tse Amang Litefiso tsa Pontšo ea LED ea Ka Hare

1. IC - Molaoli IC
   Ho sebelisoa li-IC tse fapaneng ho lipontšo tsa LED, 'me li-IC tsa mokhanni li nka karolo ea 90%.
   Li fana ka matšeliso a hona joale bakeng sa li-LED 'me li ama ka ho toba ho tšoana ha mebala, grayscale le sekhahla sa ho khatholla.

2. Li-module tsa LED
   E le karolo ea bohlokoa ka ho fetisisa, litheko tsa module tsa LED li ipapisitse le bophahamo ba pixel, boholo ba LED le lebitso.
   Lihlahisoa tse tsebahalang li kenyelletsa Kinglight, NationStar, Sanan, Nichia, Epson, Cree, le tse ling.
   Li-LED tsa theko e phahameng ka kakaretso li fana ka ts'ebetso e tsitsitseng haholoanyane, athe lihlahisoa tse theko e tlase li itšetlehile ka litheko tsa tlholisano ho fumana karolo ea 'maraka.

3. Phepelo ea Matla a LED
   Li-adapter tsa motlakase li fana ka se hlokahalang hona joale hore li-skrini tsa LED li sebetse.
   Litekanyetso tsa motlakase tsa machaba ke 110V kapa 220V, ha li-module tsa LED li sebetsa ho 5V. Motlakase o fetola motlakase ka tsela e nepahetseng.
   Hangata, lisebelisoa tsa motlakase tse 3-4 li hlokahala ka mithara e le 'ngoe. Tšebeliso e phahameng ea matla e hloka lisebelisoa tse ngata, ho eketsa litšenyehelo.

4. Khabinete ea Pontšo ea LED
   Litaba tsa Kabinete li ama theko haholo.
   Phapang ea lintho tse bonahalang—ka mohlala, tšepe ke 7.8 g/cm³, aluminium 2.7 g/cm³, magnesium alloy 1.8 g/cm³, le die-cast aluminium 2.7–2.84 g/cm³.

2.2 Mokhoa oa ho Bala Litefiso tsa Pontšo ea LED ea ka Hare

Ho hakanya litšenyehelo, nahana ka lintlha tsena tse hlano:

1. Boholo ba skrine- Tseba boholo bo nepahetseng.

2. Tikoloho ea Tlhophiso- E khetholla lintlha, mohlala, ho kenya ka ntle ho hloka tšireletso ea IP65.

3. Bohole ba ho Shebella- E susumetsa molumo oa pixel; bohole bo haufi bo hloka tharollo e phahameng.

4. Sistimi ea Taolo- Khetha likarolo tse loketseng, joalo ka ho romella / ho amohela likarete kapa li-processor tsa video.

5. Sephutheloana- Likhetho li kenyelletsa karete (mojule / lisebelisoa), plywood (likarolo tse tsitsitseng), kapa liphutheloana tsa thepa ea moea (ts'ebeliso ea khiriso).

3. Melemo le Mefokolo ea Lipontšo tsa LED tsa Ka hare

3.1 Melemo e Tšeletseng ea Lipontšo tsa LED tsa Ka hare

1. Phetoho ea Khanya e Phahameng
   Ho fapana le liprojeke kapa li-TV,Lipontšo tsa LEDe ka fumana khanya e phahameng ka nako ea 'nete, ea fihla ho linotlolo tse 10,000.

2. Lehlakore le Leholo la ho Shebella
   Lipontšo tsa LED li fana ka li-angles tsa ho shebella ka makhetlo a 4-5 ka bophara ho feta li-projeke (140 ° -160 ° e tloaelehileng), e leng se lumellang hoo e batlang e le sebali leha e le sefe ho bona litaba ka ho hlaka.

3. Ts'ebetso e Phahameng ea Litšoantšo
   Lipontšo tsa LED li fetola motlakase ho khanya ka mokhoa o nepahetseng, ho fana ka litekanyetso tse phahameng tsa ho khatholla, ho fokotseha ha latency, ghosting e fokolang, le phapang e phahameng ha e bapisoa le LCD.

4. Nako e Telele ea Bophelo
   Lipontšo tsa LED li ka nka lihora tse 50,000 (hoo e ka bang lilemo tse 15 ka lihora tse 10 / letsatsi), ha li-LCD li nka lihora tse ka bang 30,000 (lilemo tse 8 ho lihora tse 10 / letsatsi).

5. Boholo le libopeho tseo u ka li khethang
   Li-module tsa LED li ka bokelloa ka mabota a video a libopeho tse fapaneng, joalo ka libono tse emeng fatše, selikalikoe kapa li-cubic.

6. Eco-Friendly
   Meetso e bobebe e fokotsa tšebeliso ea mafura a lipalangoang; tlhahiso e se nang mercury le nako e telele ea bophelo e fokotsa tšebeliso ea matla le litšila.

3.2 Mefokolo ea Lipontšo tsa LED tsa ka Hare

1. Litšenyehelo tsa Pele tse Phahameng- Le hoja litšenyehelo tsa pele li ka 'na tsa e-ba holimo, nako e telele le tlhokomelo e tlaase li fana ka chelete ea nako e telele.

2. Tšilafalo ea Leseli e ka 'nang ea E-ba teng- Khanya e phahameng e ka baka khanya, empa litharollo tse kang li-sensor tsa leseli kapa litlhophiso tsa ho khanya li fokotsa sena.

4. Likarolo tsa Lipontšo tsa Ka hare tsa LED

1. Skrine e phahameng ea Qeto- Pixel pitch e nyane bakeng sa litšoantšo tse bohale, tse boreleli, ho tloha ho P1.953mm ho isa P10mm.

2. Flexible Installation- E ka kenngoa lifensetereng, mabenkeleng, mabenkeleng, liholong, liofising, likamoreng tsa lihotele le lireschorenteng.

3. Boholo bo Tloaelehileng- Libopeho le boholo bo fapaneng lia fumaneha.

4. Ho Hlophisoa ho Bonolo le Tlhokomelo- Moralo o bonolo oa mosebelisi o lumella ho bokana / ho qhaqha kapele.

5. Boleng bo Phahameng ba Litšoantšo- Phapang e phahameng, 14-16-bit grayscale, le khanya e feto-fetohang.

6. Chelete e sebetsang- Litheko tse theko e tlase, waranti ea lilemo tse 3, le ts'ebeletso e tšepahalang ea kamora thekiso.

7. Lisebelisoa tsa Pōpo- E ts'ehetsa li-skrini tsa LED tse pepeneneng, tse sebetsang le tse tenyetsehang bakeng sa litlhophiso tse ncha.

5. Mekhoa ea Nts'etsopele ea Lipontšo tsa LED tsa ka hare

1. Lipontšo tsa LED tse kopantsoeng- Kopanya puisano ea video, nehelano, boardboard e kopanetsoeng, projeke ea waelese, le li-control tse bohlale hore e be ntho e le 'ngoe. Li-LED tsa Transparent li fana ka boiphihlelo bo holimo ba basebelisi.

2. Tlhahiso ea Virtual Mabota a LED- Lits'oants'o tsa kahare tsa LED li kopana le litlhoko tse phahameng tsa pixel pitch bakeng sa XR le tlhahiso ea sebele, e nolofalletsang ho sebelisana le libaka tsa digital ka nako ea sebele.

3. Lipontšo tsa LED tse kobehileng- E loketse lits'ebetso tsa boqapi, mabala a lipapali le mabenkele a fanang ka libaka tse kobehileng tse se nang moeli.

4. Lipontšo tsa LED tsa sethala- Lits'oants'o tse hiriloeng kapa tse ka morao li fana ka lipono tse se nang moeli, tse kholo tse fetang bokhoni ba LCD.

5. Lipontšo tsa LED tse phahameng-Resolution- Fana ka litefiso tse phahameng tsa ho khatholla, boputsoa bo pharaletseng, khanya e phahameng, ha ho na ghost, tšebeliso e tlase ea matla, le tšitiso e nyane ea motlakase.

Hot Electronicse ikemiselitse ho fana ka lipontšo tsa LED tsa maemo a holimo tse nang le litšoantšo tse hlakileng le livideo tse boreleli bakeng sa bareki ba lefats'e.

6. Qetello

Re tšepa hore tataiso ena e fana ka lintlha tse sebetsangskrineng sa kahare sa LED .
Ho utloisisa lits'ebetso tsa bona, likarolo, litheko, le lintlha tse tloaelehileng ho tla u thusa ho fumana ponts'o ea boleng bo holimo ka theko e ntle.

Haeba u batla tsebo e eketsehileng ea pontšo ea LED kapa u batla tlhahiso ea tlholisano, ikutloe u lokolohile ho ikopanya le rona neng kapa neng!